Pre-wired Connections for Plug & Play DIY Setup.
It’s never been easier to install a dual battery system with the KickAss Battery Box. This box is designed so you don’t need any electrical expertise – just plug in your components, connect them together, and have your dual battery system up and running!
2 High Powered USB charging Sockets Including 3 Quick Charge 3.0 USB Sockets
We have used the latest technology to develop these high-powered USB charging sockets. Built with two QC3 USB Sockets and two 5V 2.1A sockets. Utilising the QC3 sockets charges devices up to 75% and never be slowed down again by cheap slow charging USB ports.
Optional Extra – Quick Release Battery Tray.
Two quick-connect straps simply hook into the sides of the box and securely lock the battery box in place. Having two trays is ideal if you plan on swapping between vehicles because you can just unhook this box and move onto the next tray and secure it within Seconds. The tray is built with 16 mounting points to suit a wide range of configurations.
3 x 12V Cigarette Outputs & 4 x Input/output Anderson Connectors
Power 12V appliances by any of 4 Anderson input/output connectors or 3 Cigarette plugs.
Built-in 50A Auto reset circuit Breakers
The automatic circuit breaker protects the battery box and your devices against any surges. The breaker will automatically trip & reset meaning you never have to worry about finding fuses in the middle of a bush!
LED Voltmeter Display With Voltmeter On/off Button
1. Clearly Display the voltage of your batteries, day or night.
2. Turn the Voltmeter off to save power when not in use.
Comfortable Handles
The handles have been designed with rounded handles to ensure the battery box can be comfortably carried even with a 30kg Battery inside.
Heavy Duty Construction
Made tough from polypropylene making the battery box pound for pound stronger than steel, resistant to heat and chemical corrosion
Heavy Duty Copper Wire.
Unlike any other battery box that use thin cheaper wire, our KickAss engineers have used the highest quality copper cable possible.
Surge Protection
Protect your vehicle’s valuable electronics with the built-in surge protection.
Please note before jump starting from the Battery Box:
Jump starting directly from the Battery Box should only be used as a last resort. To avoid causing permanent damage to your battery, it is recommended to connect the alligator clips to the flat battery directly and allow the voltage to equal out for 5 minutes. Then disconnect and attempt to start the vehicle. Jump starting while connected to an AGM Battery will likely destroy the battery.
Related products
